Login  /  Register
Hover over image to zoom
Green Choice Construction Adhesive

Green Choice Construction Adhesive

By: Titebond



Product Description

Titebond GREENchoice Premium Polyurethane Construction Adhesive
Available in 2 Sizes

4221 10.5 oz Tube, 12/Case
4222 29 oz Tube, 12/Case

GREENchoice Premium Polyurethane Construction Adhesive is an advanced urethane formula for interior and exterior projects. It is the highest performing product of its kind, offering unmatched strength and durability even when bonding two non-porous materials. It offers a fast set-up time as well as a smooth bead for effortless extrusion - even in near-freezing temperatures.

GREENchoice Premium Polyurethane is a VOC-compliant formula containing no ozone-depleting chemicals, making it safer for you and the environment.

TypePolyurethane Calculated VOC 20 g/L
State Mastic Weight/gallon 13.4 lbs.
Color Brown/green Flashpoint >200 °F
Solids 98% Freeze/thaw stability Will not freeze
Viscosity200,000 cps. Storage Life 12 months in unopenend container

Application temperature 32 °F. to 120 °F.
Service temperatures-20°F. to 120°F.
Method of application Cartridge/caulking gun
Coverage (maximum)Approximate length of bead according to bead diameter:


1/8" bead 1/4" bead 3/8" bead

10.5 oz. Cartridge 129 ft. 32 ft. 14 ft.
29 oz. Cartridge 355 ft. 89 ft. 39 ft.

Working time Approximatety1 hour - depending on humidity
Working surfaces Surfaces to be bonded should be clean and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Apply Titebond Premium Polyurethane Construction Adhesive to only one of the surfaces to be bonded. NOTE: When bonding subfloors or wet, frozen and treated lumber, nail or screw each sheet as recommended by the American Plywood Association.
CleanupScrape off dried excess with a putty knife. Remove residue with mineral spirits or equivalent solvent. Follow solvent vendor's precautions when using solvents. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.

GREENchoice Premium Polyurethane is not designed for continuous submersion. Adhesive can be difficult to remove from skin and clothing. It is recommended that gloves be worn. When using on non-porous substrates, mist with water to speed curing.

Environmentally safe - VOC-compliant
Interior/Exterior - Waterproof
Cold weather extrusion
Ideal for use on wet, frozen, treated and engineered lumber
Fast initial grab - Fast cure
Can be used to bond non-porous materials
Safe for plastic or foam
Minimal shrinkage
Post-consumer recycled cartridge and carton